Hitachi XP P9500 User Manual page 152

An example in which Sun Microsystems' HBA is used with Solaris 8 or
Solaris 9 is presented below. For details on finding the boot device name
when using an HBA other than from Sun Microsystems, and on setting the
HBA in the OBP, see the documentation for the HBA you are using.
Execute the dlnkmgr command's view operation with the -lu, -item, pd,
type, and -hdev parameters specified. An execution example is shown
below.
Edit the Physical Device character string of any owner path in the
execution results as follows. The edited path will be the boot device name
that you need to specify in the OBP.
¢
¢
¢
By editing the character strings in the underlined part of the above
execution example in this way, you get the following character string.
This is the boot device name to specify in the OBP:
/ssm@0,0/pci@1c,600000/pci@1/SUNW,qlc@4/fp@0,0/
disk@w50060e80004361d1,1:a
Note
12 Boot the system from the post-migration environment.
.
3-88
Configuration Is Changed on page 4-17
Changes to the Configuration of an HDLM Operating Environment on
page 4-17.
To obtain the boot device name specified by OBP, edit the character
string of the path determined by the above procedure as follows:
- Replace the driver name (ssd or sd) of an ssd or sd driver with
disk.
- Add the slice identifier of the / (root) file system (:a value from :a
to :h) to the end.
Delete the /device part.
Replace the driver name of the ssd driver (ssd) with disk.
Add the slice identifier of the / (root) file system (any ID from :a
to :h) to the owner path.
In Solaris 8 or Solaris 9, find and make a note of the boot device
names to specify in the OBP for all owner paths in case an error
occurs on the path specified for the boot device.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
in Precautions Regarding