Referenced Documents; Document Conventions - Hitachi XP P9500 User Manual

5 Troubleshooting on page 5-1
6 Command Reference on page
6-1
7 Utility Reference on page
7-1
8 Messages on page 8-1
A Sun Cluster 3.2 Commands
on page A-1
B Functional Differences
Between Versions of HDLM on
page B-1

Referenced documents

The following Hitachi referenced documents can be found on the applicable
Hitachi documentation CD:
• Hitachi Command Suite Global Link Manager Installation and
Configuration Guide, MK-95HC107
• Hitachi Command Suite Global Link Manager Messages, MK-95HC108
• Hitachi Adaptable Modular Storage Series User's Guide
• Hitachi Simple Modular Storage Series User's Guide
• Hitachi USP Series User's Guide
• Hitachi Workgroup Modular Storage Series User's Guide
• Thunder9580V Series Disk Array Subsystem User's Guide
• Hitachi Universal Storage Platform V Hitachi Universal Storage Platform
VM User and Reference Guide
• Hitachi Virtual Storage Platform Series User's Guide
• Reference Manual / File Conversion Utility & File Access Library

Document conventions

Font and symbol conventions are classified as:
Chapter
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Description
stop the HDLM manager. This chapter also describes
how to configure an environment to properly operate
HDLM, such as changing the HDLM management-target
devices that connect paths or replacing the hardware
that makes up a path. describes how to check path
information by using the Windows management tool.
Explains how to troubleshoot a path error, HDLM
failure, or any other problems that you might
encounter.
Describes all the HDLM commands.
Describes the HDLM utilities.
Provides information about viewing messages output by
HDLM. It also lists and explains the HDLM messages
and shows the actions to be taken in response to each
message.
Describes the Sun Cluster 3.2 commands.
Gives precautions on differences in functionality
between HDLM versions.
Preface
xv