Hitachi XP P9500 User Manual page 114

¢
¢
2 Log in to Solaris as a user with root permissions.
.
3 Execute the format command to make sure that the sd or ssd device to
.
be managed by HDLM is displayed.
# format
4 If you want to remove a device from HDLM management, execute the
.
format command to check information for each path of that device.
The information you are checking here will be used in step 11. The
following shows an example of executing the format command:
In this example, the shaded portion shows information for each path of
the device you are removing from HDLM management. Type in the
appropriate device number, and then type quit to end the format
command.
5 Insert the DVD-ROM.
.
After a few seconds, the DVD-ROM will be automatically mounted, and
the mount point of the DVD-ROM will be displayed in a list of files.
If the DVD-ROM cannot be automatically mounted, execute the following
command to mount the DVD-ROM:
# mount -F hsfs -o ro DVD-ROM-device-name DVD-ROM-mount-point
3-50
Delete this file manually after installation is completed if it is not
necessary.
Available characters for the absolute path of the license key file are as
follows:
Upper case and lower case characters, numbers, and some special
characters (/, !, #, +, -, ., =, @, _, ~)
Except when performing an unattended installation of HDLM, if a user-
specified license key file is used by entering /var/tmp/hdlm_license,
this license key file is deleted after installation has completed.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))