Hitachi XP P9500 User Manual page 576

Message ID
KAPL12564-E
KAPL12565-E
KAPL12566-E
8-116
Message Text
An attempt to back up a file
has failed. File name =
aa...aa
Could not modify file. File
name = aa...aa
The utility for setting HDLM
driver option was executed
and ended abnormally last
time.
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
utility for setting HDLM driver option
(dlmsetopt).
Delete any unnecessary files in the
file system, and then re-execute the
dlmsetopt utility.
Details
aa...aa: Backup file name
Action
Make sure there is enough free disk
capacity, and then re-execute the
utility for setting HDLM driver option
(dlmsetopt).
Details
aa...aa: Name of file to be updated
Action
Make sure there is enough free disk
capacity, and then re-execute the
utility for setting HDLM driver option
(dlmsetopt). If this message still
appears, stop any unnecessary
processes, and then re-execute the
dlmsetopt utility.
Action
Compare the contents of the /etc/
modprobe.conf file and the /etc/
opt/DynamicLinkManager/
DLMSETOPT/modprobe.conf file.
According to the result, perform the
following procedures:
The /etc/opt/DynamicLinkManager/
DLMSETOPT/modprobe.conf file was
copied for backup by HDLM before
the utility for setting HDLM driver
option (dlmsetopt) is to be executed.
If Red Hat Enterprise Linux 6 is being
used, /etc/modprobe.conf must be
read as /etc/modprobe.d/
dlmdrvopt.conf.
When the file contents match:
¢
Delete the /etc/opt/
DynamicLinkManager/
DLMSETOPT/modprobe.conf file.
Then, re-execute the dlmsetopt
utility to make sure that an error
does not occur.
When the file contents do not
¢
match:
Overwrite the /etc/
modprobe.conf file with the /
etc/opt/DynamicLinkManager/