Hitachi XP P9500 User Manual page 567

Message ID Message Text
KAPL12321-E An invalid root partition is
specified in the file. File
name = aa...aa
KAPL12322-I Execution of linuxrc started.
KAPL12323-I The insertion of the module
was started. Module name =
aa...aa
KAPL12324-E The module could not be
inserted. Module name =
aa...aa
KAPL12325-I The command started.
Command name = aa...aa
Hitachi Dynamic Link Manager User Guide (for Linux(R))
overwriting the existing file, specify
the -f parameter.
Note that if you attempt to specify an
existing directory name as the initial
RAM disk image file, it is impossible
to overwrite the file even if the -f
parameter is specified. To overwrite
the file, it is necessary to delete the
directory first.
Details
aa...aa: The name of the file
containing the invalid root partition
entry
Action
Change the root partition specified in
the /etc/fstab file to a SCSI or
HDLM device, or specify settings so
that HDLM manages the device that
is listed next to the root partition
specified in the /etc/fstab file.
Details
Execution of linuxrc started.
Action
None.
Details
The insertion of the module was
started.
aa...aa: The name of the module
being inserted
Action
None.
Details
The module could not be inserted.
aa...aa: The name of the module
whose insertion has failed
Action
Confirm that the system
environments are not changed after
creating the initial ramdisk image file.
Check whether there is a mistake in
the initial ramdisk image file specified
in the config file of the boot loader.
Details
aa...aa: The started command
Action
None.
Messages
Explanation
8-107