Hitachi XP P9500 User Manual page 456

Key name
trace_file_number
path_health_check
path_health_check_
interval
auto_failback
auto_failback_inte
rval
intermittent_error
_monitor
intermittent_error
_monitor_interval
7-46
#1
You can set a size from 100 to
16000. The default is 1000.
Set the number of trace files
(hdlmtr[1-64].log).
You can set a value from 2 to 64.
The default is 4.
Specify one of the following values
to indicate whether to enable or
disable the path health check
function:
on: Enabled (default)
off: Disabled
Specify the interval in minutes at
which the path health check is
performed.
You can specify a check interval
from 1 to 1440. The default is 30.
Specify one of the following values
to indicate whether to enable or
disable the automatic failback
function for failed paths:
on: Enabled (default)
off: Disabled
Specify the interval in minutes from
the time the previous path status
check finished until the time the
next path status check started.
You can specify a check interval
from 1 to 1440. The default is 1.
Specify one of the following values
to indicate whether to enable or
#3
disable intermittent error
monitoring:
on: Enabled
off: Disabled (default)
Specify the interval in minutes that
monitoring for intermittent errors is
performed.
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))
#2
Description
Necessity of
definition
Maxim
Upgrad
um
e
numbe
New installa
r of
installa tion or
charac
tion re-
ters
installa
tion
Optional Optional 2
Optional Optional 3
Optional Optional 4
Optional Optional 3
Optional Optional 4
Optional Optional 3
Optional Optional 4