Hitachi XP P9500 User Manual page 401

Items displayed by the dlnkmgr view
-lu -item command
HCTL
All items are displayed
In the sub-parameters, -hdev or -pathid, you can filter the LU
information to be displayed. If you omit both parameters, the command
displays the information about all the LUs recognized by HDLM.
For details on the contents of each displayed item, see
Information on page
The sub-parameters are:
-hdev host-device-name
Displays information only for the paths accessing the specified host
device.
Specify the name of the logical device file (minus the partition
number), /dev/sddlm[aa-pap], for the HDLM device. For details on
logical device files for HDLM devices, see
HDLM Devices on page
The host-device-name string is case-sensitive.
-pathid AutoPATH_ID
Use this parameter to display only the information about the LU that
is connected to the path with that specified AutoPATH_ID.
-t
Omits the title for each information item.
Example:
The following example shows how to display LU information by using
iLUs as a sorting key, and selecting the items to be displayed. Execute
the following command to display SLPR, PathName, ChaPort, CLPR,
Type, IO-Count, IO-Errors, DNum, IEP, and HCTL:
Command Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Values specified after the -item
hctl
all
6-51.
2-11.
parameter
Table 6-17 LU
Logical Device Files for
6-49