Hitachi XP P9500 User Manual page 133

Command suite for linux(r)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

p is obtained by the following formula:
p = (s x m) / 1024 [MB]
Where s is the error log file size (unit: KB, default value: 9900) and m is
the number of error log files (default value: 2). The result is rounded up
to MB.
#2
This size differs depending on the settings for trace files (maximum size:
1000 MB).
q is obtained by using the following formula:
q = (t x n) / 1024 [MB]
Where t is the trace file size (unit: KB, default value: 9900) and n is the
number of trace files (default value: 4). The result is rounded up to MB.
#3
The size of the process-specific-trace information file.
#4
The size of the log file for inquiry information.
u is obtained by using the following formula:
u = (2500 bytes x number-of-paths) / 1024 / 1024 [MB]
The result is rounded up to MB.
#5
The default value for the size of the log files for Hitachi Command Suite
Common Agent Component.
The size of each log file (dlmwebagent[1-N].log) is 9900 KB
(approximately 10 MB). The size of the log files is calculated as
approximately 20 MB because two log files are created by default.
You can create a maximum of 16 log files depending on the setting in the
dlmwebagent.properties file. If you create 16 log files, the size of the
log files will be approximately 160 MB.
#6
The size of the log files for the dlmcfgmgr utility.
This size differs depending on the settings for the size of the log files for
the dlmcfgmgr utility (maximum size: 1954 MB (approximately 2 GB)).
v is obtained by using the following formula:
v = (w x 2) / 1024 [MB]
Where w is the size of the log files for the dlmcfgmgr utility (unit: KB,
default value: 1024).
The result is rounded up to MB.
#7
This is an approximate value when the default values are used for the
HDLM functions and when the number of paths is 256.
For details on the values of the HDLM functions, see
Recommended and Default Values of Each Function on page 3-185
Setting Up the HDLM Functions on page
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Table 3-57 The
3-184.
in
3-65

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Dynamic link manager

Table of Contents