Download  Print this page

Maintenance - Craftsman 25416 Instruction Manual

Hide thumbs

Advertisement

IV. MAINTENANCE
AND STORAGE
Keep all nuts, bolts and screws tight to be sure the equip-
ment is in safe working condition.
Never store the equipment with petrol in the tank inside
a building where fumes may reach an open flame or
spark.
Allow the engine to cool before storing in any enclo-
sure.
To reduce the fire hazard, keep the engine, silencer, bat-
tery compartment and petrol storage area free of grass,
leaves, or excessive grease.
Check the grass catcher frequently for wear or deteriora-
tion.
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done
outdoors.
On multi-bladed
machines,
take care as rotating one
blade can cause other blades to rotate.
When machine is to be parked, stored or left unattended,
lower the cutting means unless a positive mechanical lock
is used.
_
WARNING: Always disconnect
spark plug wireand
place wire where it cannot contact spark plug in
order to prevent accidental
starting when setting
up, transporting,
adjusting or making repairs.
4

Advertisement

Table of Contents
loading