GE Monogram ZHU30 Owner's Manual page 20

Care and Cleaning
Induction Cooktop
Burned-on
residue
WARNING: DAMAGEto Four glass surface mag
occur if gou use scrub pads other than the pad
included with Four cooktop.
1 Allow the cooktop to cool.
2 Spread a few drops of CERAMA BRYTE ® Ceramic
Cooktop Cleaner on the entire burned residue
area.
3 Using the included CERAMA BRYTE ® Cleaning
Pad for Ceramic Cooktops, rub the residue area,
applging pressure as needed.
4 If any residue remains, repeat the steps listed
above as needed.
For additional protection, after all residue has
been removed, polish the entire surface with
CERAMA BRYTE ® Ceramic Cooktop Cleaner
and a paper towel.
Use a CERANA BRYTE ® Cleaning Pad for
Ceramic Cooktops ar a Scotch-Brite ®
Multi-Purpose No Scratch blue scrub
pad.
Heavg
burned-on
residue
1
2
Allow the cooktop to cool.
Use a single-edge razor blade scraper at
approximatelg a 45 ° angle against the glass
surface and scrape the soil. It will be necessarg
to applg pressure to the razor scraper in order
to remove the residue.
3 After scraping with the razor scraper, spread a
few drops of CERAMA BRYTE ¢ Ceramic Cooktop
Cleaner on the entire burned residue area. Use
the CERAMA BRYTE ®Cleaning Pad to remove
ang remaining residue.
4 For additional protection, after all residue has
been removed, polish the entire surface with
CERAMABRYTE ¢ Ceramic Cooktop Cleaner and
a paper towel.
The CERAMA BRVTE ®Ceramic Cooktop
Scraper and all recommended supplies
are available through our Parts Center.
See instructions under "To Order Parts"
section on next page.
NOTE: Da not use a dull or nicked
blade.
20