LG 47LD650 Owner's Manual page 93

01,Power (Command: ka)
7bconfroU Power On/Off ofthe TV'
Transm_"_or_ [ ] a][ ][Set D ![ }[Dala][Cr]
Dala 00:Power Off Data 01: P ower On
Ackowledgeme t {a][ [SetD[ ][OKibG[Daa][x
Inalike manner, ifother functions fransnnif _FF' data
based o nthis format Acknowledgement data feed
back presents status a bout each function.
' Note: Inthismodel, TVwifl s end theAcknowledge
after p ower onprocessing completion.
]"here m ight b eafmedelay b etween cornrnand and
acknowledge.
02, Input Select (Commands x b)
To select input source for TV,
Transrnsso_ Ix:[b][ [SefID][ ][Dalal[Cr]
Data 00: D'I°V (Antenna) Data 01: D"YV (Cabne)
Data lO: Anaiog (Antenna) Data 11: Anaog (Cable)
Data 20:AV1 Data 21: _;V 2
Dala 40: Component] Data 41: Component 2
Data 42: Component 3 Data 60: RGB-PC
Dala 90: HDMI] Data 91:HDM2
Data 92:HDMI3 Data 93:HDMI4
Ack_owledgemen b][ ][Set ID][ ][OK/NG} Data][×]
Use the feature depending on your model
O& Aspect Ratio (Command: k c)
To .adjust the screen format.
_ransmsson [kIi]c] ]Set/D][
Data 01:4:3
Data 02 16:9
Data 04: Zoom
Data 06: Set by program
Ack_owledgerner t [cl][
][Data]C}
Data 09: Just scan
Data lO: Cnema Zooml
Data lF Cnema Zoom16
][Set D][ ][OK/NG[Dala][x
04. Screen Mute (Command: k d)
To select screen mute on/off_
Tr_msmsson [k][d][ ][Set D][ ]/iD_!_a][C ]
Data 00: Screen mute off (Picture on}, Video-out Mute off
Data 01: Screen mute on (Picture off)
Data 10: Video out Mu'#e on
Ack oe_ledgeme t [d [ ][Set iD][ ][OK/r, SG [Data][x
In case of Video-out Mute on oniy, TV wiii display On
Screen Display (OSD). But_ in case of screen mute
on_ TV will not display On Screen D splay (OSD).
05. Volume Mute (Command:: k e)
To control volume mute on/off
You can also adjust mute usng the MUTE b_4fton on
remote conlrol,
Tr_msmssior_ [k][e][ ][Se} D][ [Data][Cri
Data 00: Volume mute, on ('volume off)
Data 01: Voiume mute, off (Volume on)
Ac nowedgemen_[e][ }[Sel ID][ }[OK/NG][Data}[x]
06. Volume ControJ (Command: k f)
70 adjust voiume
'You can also ad/ust volume with the voiume bufons
on remote control.
J}ansmesion k][f ]Se iD ][Data][Cr]
Data Min: O0 - Max: 64 ('transmit by He×adecimal code/
_Refer to 'Reai data mapping'.
Acknowedge_,ent If]i] ][Set ID][ ][OK/NG][O_da][x]
07. Contrast (Command: k g)
To adjust screen contrast.
You can also adjust contrast n the PICTURE menu
Transmssion [k.][g![ /[SetID[ ][Data]O]
Data Min: O0 _ Max: 64 (transmit by Hexadecimal code)
_Refer to 'Real do'to mappingt
Acknowedgemenf [g][ [Se_ D[ [OK/NG][Dsta[x]
08. Brightness (Command: k h)
To adjust screen brightness.
You can also adgus't brightness in the P!CTURE menu.
T:arlsmssion k][][ ][Set D][ ][D_t,_][mr]
Data Min: O0 - Max: 64 ('_fransmif by Hexadecimal code)
<Refer to 'Reai data mappingt
Ac nowedgement [hi[ ][Se ID][ O_<!NG][Dafa[×]
09. Color (Command: k i)
°[o adjust screen colon
"You can also adjust color in the PICTURE menu_
'[ransmssion [k][][ ][Set D[ [Data][Cr]
Data Min: O0 o Max: 64 {*transmit by Hexadecimal code)
_Refer fo 'Real do'to mappingt
Acknowedge_-_ent [il[][Se_ D [OK/NG][Oata/[x]
10_ Tint (Command:
k ])
"Fo adjust screen tint
You can also adjust tint in the. PICTURE menu
fransmssion [k][][ ][Se, D[ [Data][Cr]
Data Red: O0 = Green: 64 ( fransm_ by Hexadecimal code}
*Refer to 'Real data mappingt
Acknowedgement [ ][ ][Set D![ [O_</NG [Data]I×
3>
m
Z
X
187