Table of Contents
Advertisement
Countertop opening and clearance
dimensions that are shown must be
used. Given dimensions provide required
clearances.
Mobile home installation: The
installation of this cooktop must conform
to the Manufactured Home Construction
and Safety Standards, Title 24 CFR, Part
3280 (formerly the Federal Standard for
Mobile Home Construction and Safety;
Title 24 HUD part 280); or when such
standard is not applicable, the Standard
for Manufactured Home Installations
(Manufactured Home Sites, Communities
and Setups), ANSI A225.1 — latest
edition*, or with local codes.
In Canada, the installation of this cooktop
must conform with the current standards
CAN/CSA-Z240 — latest edition**, or with
local codes.
The cooktop is designed to hang from the
countertop by its side and rear flanges.
The gas and electric supply should be
located as shown in "Gas and Electric
Dimensions," Page 5, so that they are
accessible without requiring removal of
the cooktop.
The backguard included with the cooktop
must be installed when a standard 24"
(61 cm) deep base cabinet is used and
there is zero clearance between the back
edge of cooktop and combustible rear
wall.
For island installations or other
installations with more that 1" (25.4 mm)
clearance to the back wall, use the
optional stainless steel island trim,
included with the cooktop, to cover the
backguard mounting flanges.
Provide an 8" x 8" (20.3 cm x 20.3 cm)
cutout in left rear corner of cutout
enclosure to provide clearance for gas
inlet, power supply cord, and to allow the
rating label to be visible.
Copies of the standards listed may be
obtained from:
* National Fire Protection Association
One Batterymarch Park
Quincy, Massachusetts 02269
** CSA International
8501 East Pleasant Valley Rd.
Cleveland, Ohio 44131-5575
4
Cabinet and Cutout
Dimemsions
18" (45.7 cm) min.
clearance upper
cabinet to countertop
**NOTE: 42" (106.7 cm) min. clearance between top of cooking platform and bottom of an unprotected
wood or metal cabinet.
Dimensions shown are for
25" (63.5 cm) deep countertop and
24" (61 cm) deep base cabinet
36" (91.4 cm)
see note***
12-5/16" (31.3 cm)
min. clearance to
side wall - both sides
***Minimum clearance to combustible rear
wall with island trim is 1" (25.4 mm).
Cutout Dimensions
36" (91.4 cm) min.
13" (33 cm) max.
upper cabinet depth
solid sides
and bottom
8" (20.3 cm)
Upper Cabinet
Clearance Dimensions
8"
(20.3 cm)
(55.9 cm)
3/4"
(19.05 mm)
min.
35-1/4"
(89.5 cm)
see corner
notch detail
36" (91.4 cm)
35-7/8" (91.1 cm) for
zero clearance fit
3/8"
(9.5 mm)
CORNER
NOTCH
DETAIL
see note**
for minimum
clearances
22"
front face
of base
cabinet
22"
(55.9 cm)
front face
of base
cabinet
1-1/4"
(31.8 mm)
7-1/4"
(18.4 cm)
Advertisement
Table of Contents
