Install Chimney Covers; Install Grease Filters; Check Operation - KitchenAid KWCU460WS00 Installation & Use Manual

36" (91.4 cm) and 48" (121.9 cm) designer commercial-style wall-mount canopy range hood
Hide thumbs Also See for KWCU460WS00:
Table of Contents

Advertisement

Available languages

Available languages

Install Chimney Covers

1. Install damper on top of the exhaust opening. Check that the
damper opens freely. On 48" (121.9 cm) models, install
2 dampers.
2. Connect the vent system and seal all connections with
clamps.
Install Upper Chimney Cover
1. Slightly spread the sides of the cover apart and hook them
behind the chimney mounting brackets.
2. Attach the cover to the brackets with 4 flat head screws.
3. Securely tighten screws.
A
A. 4 flat head screws
Install Lower Chimney Cover
1. Slightly spread the sides of the cover apart and hook them
behind the upper chimney.
2. From inside the range hood, use the 4 Phillips washer head
screws to attach the lower chimney cover to the canopy of
the range hood.
3. Securely tighten screws.
A. 4 washer head screws
A
A

Install Grease Filters

NOTE: Use 2 hands to install filter, one to pull and turn the knob,
the other to hold the filter in place so that it doesn't fall.
1. Insert back edge of filter into rear channel of the filter
opening.
2. Pull out on knob and turn counterclockwise, position front
edge into place and release knob.
3. Repeat for remaining filters.

Check Operation

1. Check operation of the range hood by turning on the power.
2. The range hood controls are located on the right-hand
underside of the range hood.
A. Controls
B. Filters
C. Heat lamp switch
3. Move the light switch to "1" position. The light should turn on.
4. Move fan switch to "On" position. The fan should operate.
5. Move the fan speed switch to "1" position for low speed, "2"
position for medium speed, or "3" position for high speed.
6. Move fan and light switches to "Off" position to turn fan and
light off.
7. If range hood does not operate, check to see whether a
circuit breaker has tripped or a household fuse has blown.
Disconnect power supply and check that the wiring is
correct.
NOTE: To get the most efficient use from your new range hood,
read the "Range Hood Use" section.
A
B
C
9

Advertisement

Table of Contents
loading

Table of Contents