Sharp FO-P610 Operation Manual page 38

Sending a Fax by Automatic Dialling
Redial
You can automatically redial the last number dialled. This procedure can be
used to send a fax or make a phone call.
1
If you are sending a fax, load the
document(s).
•
If desired, press
resolution and/or contrast.
2
Press
number dialled. Make sure the number that appears is the number you
wish to dial.
3
If you are sending a fax, press
begins.
If you are making a phone call, lift the handset. Dialling begins.
Note:
If a fax transmission is unsuccessful and DOCUMENT JAMMED appears in
the display, remove the document as explained on page 80. (This may occur if
the other fax machine doesn't respond properly when you attempt to send the
document.)
36
RESOLUTION
to set the
once. <REDIAL> appears in the display, followed by the last
START/MEMORY
. Dialling and transmission
READY TO SEND