Table of Contents
Advertisement
Selecting the Economy Mode
These functions allow you to reduce the power consumption of the projector.
Setting the Power Save
Mode
Select "Power Save" in "Economy
Mode" under the "Options (1)" menu on
the menu screen.
➝ For operating the menu screen, see
pages
42 to
45.
Note
• Although lamp life and noise are improved
when "Power Save" is set to "ON", bright-
ness decreases by 20%.
• "Power Save" mode is factory preset to
"OFF".
Monitor Out/RS-232C
Off Function
This projector consumes power when using a
monitor connected to the OUTPUT (INPUT 1,
2) terminal and a computer connected to the
RS-232C terminal. When not using these ter-
minals, "Mntr.out/RS232" can be set to "OFF"
to reduce standby power consumption.
Select "Mntr.out/RS232" in "Economy
Mode" under the "Options (1)" menu on
the menu screen.
➝ For operating the menu screen, see
pages
42 to
45.
Monitor Out/RS-232C connection
ON
is set to "ON".
Monitor Out/RS-232C connection
OFF
is set to "OFF".
Note
• Set "Mntr.out/RS232" to "ON" when using
the Sharp Advanced Presentation Software.
Status
Brightness
ON
80%
(Low power
mode)
OFF
(Standard
100%
mode)
Power
Lamp Life
consumption
290 W
2,000 hours
340 W
1,500 hours
-69
Advertisement
Table of Contents
