Table of Contents
Advertisement
Adjusting the Picture
You can adjust the projector's picture to your preferences with the following picture settings.
Selected Item
Contrast
For adjusting the contrast level
Bright
For adjusting the brightness of an image
Color
For adjusting the color intensity of the image
Tint
For adjusting the tones of an image
Sharp
For making sharper or softer the contour of an image
Red
For adjusting the redness level
Blue
For adjusting the blue level
CLR Temp
For adjusting the color temperature of an image
Adjusting Image Preferences
Adjust the "Picture" menu on the menu screen.
➝For operating the menu screen, see pages
Note
• "Color", "Tint" and "Sharp" are not displayed
when selecting INPUT 1 or 2 and the "Sig-
nal Type" is "RGB" .
• The picture adjustments can be stored
separately in each input mode.
• When the signal type in INPUT 1 or 2 has
been set to Component, "Sharp" can be
adjusted when 480I, 480P, 540P, 580I,
580P, 720P, 1035I or 1080I signals are
connected.
• To reset all adjustment items, select "Re-
set" and press
.
•"Red", "Blue" and "CLR Temp" cannot be
adjusted when "Color Selected" on the
C.M.S. menu is set to "sRGB".
Selecting the Signal Type
This function allows you to select the input sig-
nal type RGB or Component for INPUT 1 or 2.
Select "Signal Type" in the "Picture" menu on the menu screen.
➝ For operating the menu screen, see pages
Note
•
RGB
Set when RGB signals are received.
•
Component
Set when Component signals are received.
-46
Description
42 to
45.
42 to
45.
\ button
For less contrast
For more contrast
For less brightness
For more brightness
For less color intensity
For more color intensity
Skin tones become purplish
Skin tones become greenish
For less sharpness
For more sharpness
For weaker red
For stronger red
For weaker blue
For stronger blue
Decreases color
Increases color
temperature for warmer,
temperature for cooler,
reddish, incandescent-
bluish, fluorescent-like
like images.
images.
| button
Advertisement
Table of Contents
