Connecting To A Monitor - Sharp Notevision XG-C50X Operation Manual

Connecting the Projector to Other Devices

Connecting to a Monitor

Watching Images on
Both the Projector and
a Monitor
You can display computer images on both the
projector and a separate monitor using two
sets of an RGB cable. An RGB cable is sup-
plied with this projector. You need to buy an-
other RGB cable for connecting the projector
to a monitor.
1
Connect the projector to the
computer and monitor using
RGB cables (one is supplied,
the other is sold separately).
2
In the "Options(1)" menu, se-
lect "Economy Mode", "Mntr.
out/RS232" and then "ON".
(see page 69.)
Note
• Analog RGB signals as well as Component
signals can be output to the monitor.
-24 -24
Supplied
accessory
Computer RGB cable (32'10" (10.0 m))
Optional
Type: AN-C10BM
AN-C10MC
cable
AN-C10PC
To RGB input terminal
RGB cable
(sold separately)
RGB cable
(supplied)
RGB cable
Monitor
Desktop computer
To RGB output terminal