Preparation; Filter Installation - Sharp Plasmacluster KC-930EU Operation Manual

PREPARATION

FILTER INSTALLATION

To maintain the quality of the fi lter, it is installed in the main unit and packed in
plastic bag. Be sure to remove the fi lter from the plastic bag before using the
unit.
1 Remove the fi lter
1
Remove the Back Panel.
Pull the tab at the top of the Back Panel.
2
Remove the Filter from the
plastic bag.
2 Intall the fi lter
1
Place the Filter within the main unit.
Do not install the fi lter backwards or the unit
will not operate properly.
2
Replace the Back Panel to the main
unit.
3
Fill in the usage start date on the
Date Label.
Use the date as a guide for the fi lter replace-
ment schedule.
Be sure to remove the power plug from the wall outlet.
Date Label
E-6
Tab