Preparation; Filter Installation - Sharp Plasmacluster KC-6400E Operation Manual

PREPARATION

FILTER INSTALLATION

To maintain the quality of the filters, they are installed in the main unit and packed in the
plastic bags. Be sure to remove the filters from the plastic bags before using the unit.
1
Remove the filters
1
Remove the Front Panel.
Push in the hooks,
then pull the Front
Panel.
Front Panel
Hook
2
Remove the Filter Support.
Push in the hooks
on top , then pull
the Filter Support.
(Only KC-6500E)
Filter Support
Remove the Washable Active
3
Carbon Filter (black) and
HEPA Filter (white) from the
plastic bags.
HEPA Filter
Wachable Active
Carbon Filter
The filter may sometimes discharge
deodorant powder, but such discharge does
not affect deodorizing performance.
Be sure to remove the power plug from the wall outlet.
(At open)
E-10
2
Install the filters
1
Place the HEPA Filter within
the main unit.
Please make sure that the HEPA
Filter is placed in proper orientation.
Do not install the
filter backwards or
the unit will not
operate properly.
HEPA Filter
2 Place the Washable Active
Carbon Filter into the main
unit.
KC-6400E
Fit the Washable Active
Carbon Filter to the tab on
the top of the main unit.
Fit the band to the tab facing toward
you in the direction indicated by the
arrow, and insert fully.
band(blue)