Specifications - Sharp Plasmacluster KC-6400E Operation Manual

TROUBLESHOOTING
ERROR DISPLAY
LAMP INDICATION
The "LOW" Operation Indicator
Light (Clean Air) blinks.
The "Auto" Operation Indicator
Light (Clean Air ) blinks.
The "Humidity Indicator Light
(30)" blinks.

SPECIFICATIONS

*1 •The applicable floor surface area is appropriate for operating the unit of maximum fan speed.
•Applicable floor surface area indicates the space where a certain amount of dust particles can be removed in 30 minutes.
(JEM1467)
*2 •Humidification Amount changes in accordance with indoor and outdoor temperature and humidity.
Humidification Amount increases as temperatures rise or humidity decreases.
Humidification Amount decreases as temperatures decrease or humidity rises.
•Measurement Condition : 20 degree celcius, 30% humidity (JEM1426)
Standby Power
In order to operate the electrical circuits while the power plug is inserted in the wall outlet, this product consumes
about 0.8W of standby power.
For energy conservation, unplug the power cord when the unit is not in use.
If error occurs again, contact the Sharp Service Centre.
REMEDY
Fan motor disconnected or abnormal.
Operation stops.
• Pressing the POWER ON/OFF button will reset the error
display.
Microcomputer Errors.
• Remove the power plug, wait for a while, then reinsert the
plug and try operating the device again.
Temperature/Humidity Sensor Errors.
• Remove the power plug, wait for a while, then reinsert the
plug and try operating the device again.
E-20