On Timer - Sharp 20AG2-SMK3 Operation Manual

TV/VIDEO
1 2 3
4 5 6
7 8 9
CH
0
CH
CH
CH
FEATURE TIMER PICTURE
CH-SET NORMAL TIMER
NORMAL
TV
TV Set (Bottom)
Power indicator (Flashing)
• To cancel the timer setting, press
timer to "- - : - -".
• The timer can be set in ten-minute intervals.
• The On Timer is cancelled if the power is turned off using
• If the TV set is turned on by the On Timer, then the TV set will be automatically turned off in two hours if
no buttons are pressed on the TV set or remote control.

On timer

Automatically turns power on after a set length of time has
passed.
1
Press
TIMER
screen.
2
CH
Press
select "ON ".
3
Press
time for TV to turn on.
• Maximum time that can be preset is
12 hours and 50 minutes.
• As soon as the time is entered, the
timer starts to count down.
4
CH
Press
select "POSITION".
5
Press
the channel.
6
CH
Press
select "VOLUME".
7
Press
set volume.
8
TIMER
Press
normal screen.
9
Press
Standby mode.
• Power indicator will flash to indicate On Timer is set.
• When the preset length of time (in the above example, eight hours)
has passed, the power turns on and a picture appears on the screen.
• The ON TIMER speaker volume gradually increases from zero to
preset volume.
when "
NORMAL
TIMER
to call TIMER
OFF
ON
POSITION
VOLUME
CH
/ to
TIMER
/ to set
OFF
ON
POSITION
VOLUME
CH
TIMER
CH
/ to
OFF
ON
POSITION
VOLUME
/ to set
CH
TIMER
CH
/ to
OFF
ON
POSITION
VOLUME
/ to
CH
to return to
to put TV set into
" is displayed on the left of "ON
POWER
on the TV set.
--:--
--:--
--:--
--:--
8:00
--
--
--:--
:SELECT
:ADJUST
--:--
8:00
CH28
--
--:--
:SELECT
:ADJUST
--:--
8:00
CH28
20
--:--
:SELECT
:ADJUST
" so as to set the
E 20