Function Adjustment; Blue Back - Sharp 14AG2-DC Operation Manual

Function Adjustment

Blue Back:

Automatically turns the screen blue after 5 seconds if the broadcast signal is not
received (e.g. when a TV station closes down). After 15 minutes of non-reception,
the TV set enters Standby mode.
1
4
7
CH
CH
@
FUNCTION TIMER
!,#
SYSTEM NORMAL
TV
When the BLUE BACK is set to "ON"
No signal
• Poor reception due to weak signals, and too much noise might activate the BLUE BACK function, despite the
presence of a broadcast signal. To continue watching TV under these conditions, switch the BLUE BACK
"OFF".
• If approximately 6 seconds pass without a button being pressed, the mode setting is automatically terminated
and the TV set returns to normal mode.
18
!
Press the FUNCTION button 4
times.
TV/VIDEO
@
Press the VOLUME UP ( ) or
2 3
DOWN ( ) button to select ON
or OFF.
5 6
8 9
#
Press the FUNCTION button 2
0 times. The on-screen display
disappears.
PICTURE
Blue screen
➤
after 5
seconds
Screen off
➤
after 15
minutes
Standby mode
POWER indicator
lights up dimly