Auxiliary Mode; Power Selector - Sharp AY-XP08CE Operation Manual

AUXILIARY MODE

Use this mode when the remote control is not available.
TO TURN ON
Lift the front panel of the indoor unit and press the
AUX. button on the operation panel.
• The red OPERATION lamp (
light and the unit will start operating in the AUTO
mode.
• The fan speed and temperature setting are set
to AUTO.
TO TURN OFF
Press the AUX. button on the operation panel
again.
• The red OPERATION lamp (
turn off.
NOTE:
If the AUX. button is pressed during normal opera-
tion, the unit will turn off.

POWER SELECTOR

When installing the air-conditioner to a residence
with small electrical current capacity, switch the
POWER SELECTOR to "L". The air conditioner
will operate with reduced power, and the circuit
breaker tripping or fuse blowing caused by excess
power consumption can be avoided.
• COOLING or HEATING capacity will be reduced
when operating at "L" setting.
• Consult your dealer or qualified technician if con-
tinuous breaker tripping or fuse blowing is expe-
rienced even by switching to "L" setting.
Maximum ampere
at "H" setting
Maximum ampere
at "L" setting
) on the unit will
) on the unit will
(only for model AY-XP13CE)
AY-XP13CE
12A
8A
E-16
H
L
AUX.
H
L
AUX.