Troubleshooting; Same Image - Epson PowerLite 78 Quick Setup Manual

Troubleshooting

If you see a blank screen
If you see a blank screen or the No signal message after turning on
your computer or video source, check the following:
 M ake sure the
flashing and the A/V Mute slide (lens cover) is open.
 M ake sure the cables are connected correctly. (See the User's Guide
for more information.)
 I f you've connected more than one video source, you may need to
press the Source Search button on the projector or the Search or
Source Search button on the remote control to select the one you
want to watch. (Allow a few seconds for the projector to sync up
after pressing it.)
If the projector and the notebook don't display the

same image

If you're using a Windows notebook:
 H old down the Fn key and press the function key (such as
or CRT/LCD) that lets you display on an external monitor. On most
systems, the
LCD screen and the projector, or display on both at the same time.

C heck your monitor settings to make sure both the LCD screen
and the external monitor port are enabled. From the Control
Panel, open the Display utility. Click the Settings tab, then click
Advanced. The method for adjusting the settings varies by brand;
you may need to click a Monitor tab, then make sure the external
Monitor port is set as your primary display and/or enabled. See
your computer's documentation or online help for details.
If you're using a Macintosh
1
F rom the Apple
Display or Displays.
2
S elect VGA Display or Color LCD, click Arrangement or Arrange,
and make sure Mirror Displays is checked.
Epson and Instant Off are registered trademarks and Epson Exceed Your Vision is a registered
logomark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of
Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2008 Epson America, Inc. 6/08
Printed in XXXXXX
power light on the projector is green and not
or CRT/LCD key lets you toggle between the
notebook with Mac OS
®
® menu, select System Preferences, then click
®
X:
CPD-25845