Quick Return - Sharp VL-Z400S Operation Manual

Useful Features
Camera Recording

Quick Return

Available mode:
Tape Camera
If while playing back your tape you want to
quickly return to the last recorded scene
and start recording again, use the quick
return function.
1
Set the camcorder to Tape Camera
mode.
2
In Recording Standby mode, press
the MENU button to display the menu
screen.
3
Press l or m on the Operation
button to select T, then press the
centre of the Operation button.
4
Press l or m to select "QK.
RETURN", then press the centre of
the Operation button.
S E T T I N G 1
Q K . R E T U RN
W I D E MOD E
DG T L
T A P E S P E E D
R E T URN
38
S T A R T
S T O P
Z O OM
5
Press l or m to select "START",
then press the centre of the Operation
button.
• "SEARCH" flashes, and the tape
begins fast forwarding or rewinding
to the end of the last recorded scene.
• When the tape reaches the end of
the last recorded scene, "FINISHED"
is displayed, and the camcorder
enters Recording Standby mode.
6
Press the MENU button to turn off the
menu screen.
Notes:
• To cancel the quick return function while
"SEARCH" is flashing, press the centre of
Operation button twice.
• Quick return will not work if you remove the
cassette and reload it after recording or if
nothing has been recorded since loading.
• When the camcorder remains in Recording
Standby mode for more than 5 minutes and
enters stop mode, quick return will not work.
S E A R C H