Epson PowerLite 732c User Manual page 53

The default setting for the Password Protect function is
these steps to turn password protection on:
1. Press the button on the remote control for about five
Freeze
seconds.
You see this screen:
2. Use the pointer button to set
Then press .
Enter
3. Press
Esc.
4. Select and press
Password
5. When you see a message asking if you want to change the
password, select
Yes
6. Hold down the
Num
numeric keypad to enter a four digit password. (The default
setting is 0000.)
7. When you see a confirmation message, reenter the password.
Then press the
Menu
8. Press the button on the remote control to deactivate the
Num
numeric keypad.
9. If you want to disable the password temporarily, select
press . Then hold down the
Enter
numeric keypad to enter the number of hours (from 0 to 9999)
that you want the password feature disabled. If you want the
projector to request the password every time it is turned on, set
the timer to .
0H
Power ON Protect
.
Enter
and press .
Enter
button on the remote control and use the
button to exit the screen.
button while you use the
Num
. Follow
OFF
caution
If you lose the remote
to .
ON
control, you will not be able
to enter the password. Keep
the remote control in a safe
place at all times.
and
Timer
Fine-Tuning the Projector
53