Adjusting The Air Flow Direction - Sharp AH-AP18CF Operation Manual

ADJUSTING THE AIR FLOW DIRECTION

VERTICAL AIR FLOW DIRECTION
The air flow direction is automatically preset in each mode as follows for optimum
comfort:
COOL and DRY mode
FAN ONLY mode
HOW TO ADJUST THE AIR FLOW DIRECTION
Press the SWING button on the re-
mote control once.
• The vertical adjustment louvre will
change its angle continuously.
Press the SWING button again
when the vertical adjustment louvre
is at the desired position.
• The louvre will stop moving within
the range shown in the diagram.
• The adjusted position will be
memorized and will be automati-
cally set to the same position
when operated the next time.
HORIZONTAL AIR FLOW DIRECTION
Hold the horizontal adjustment lou-
vre as shown in the diagram and
adjust the air flow direction.
CAUTION
Never attempt to adjust the vertical adjustment louvres manually.
• Manual adjustment of the vertical adjustment louvre can cause the unit to malfunction
when the remote control is used for the adjustment.
• When the vertical adjustment louvre is positioned at the lowest position in the COOL or
DRY mode for an extended period of time, condensation may result.
Do not adjust the horizontal adjustment louvre extremely to the right or left when operating
the air conditioner with fan speed "SOFT" for an extended period of time.
Condensation may form on the louvres.
Horizontal air flow
Diagonal air flow
Adjustment range
COOL and DRY mode
The adjustment range
is narrower the SWING
range in order to pre-
vent condensation
from dripping.
10
FAN ONLY mode
The range is wide so
the air flow can be di-
rected toward the floor.