Connecting The El-94Xx/96Xx To The Pc - Sharp CE-LK1P Operation Manual

Connecting the EL-94xx/96xx to the PC

Connect the EL-94xx/96xx to the PC with the attached PC LINK adaptor.
NOTE: Push in all connectors firmly and make sure they cannot be removed by pulling
them lightly.
Also tighten the fixing screws.
1. Turn off the EL-94xx/96xx and the PC.
2. Connect one side of CE-450L to the peripheral connecting terminal (communica-
tion port) on the bottom of the EL-94xx/96xx; the other side to PC LINK adaptor.
3. The serial port shape of your PC determines connecting procedures as follows:
Shape of PC serial port
25 pin (male)
9 pin (male)
EL-94xx/96xx
CE-450L
(communication cable)
PC LINK adaptor
* The illustration shows connecting procedure for PC serial port shape of 9 pin
(male).
Connect the other side (25-pin side) of PC LINK adaptor
to the serial port for the PC.
Connect the other side (25-pin side) of PC LINK adaptor
to the 25-pin terminal of a converting adaptor. Also
connect the other side (9-pin side) of the converting
adaptor to the serial port for the PC.
Peripheral connecting terminal
Converting adaptor
Connecting procedure
25 pin
25 pin
To PC serial port
9 pin
7