Brother MFC-J4710DW Advanced User's Manual page 71

PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive
l
If you do not want to change additional
settings, press
Press Start to print.
Paper Size and Print Size
a
Open the media slot cover.
b
Put the memory card or USB Flash
memory drive in the correct slot.
c
Press Photo.
d
Swipe left or right to display
View Photos.
e
Press View Photos.
Press OK.
f
Swipe left or right, or press d or c to
display each photo. When the photo you
want is displayed, press it and then
press OK.
g
Press OK.
h
Press Print Settings.
i
Swipe up or down, or press a or b to
display Paper Size.
j
Press Paper Size.
or OK.
8
k
Swipe up or down, or press a or b to
display 4"x6", 5"x7", Letter,
Ledger, A4 or A3. Press the option you
want to set.
Do one of the following:
 If you chose Letter or A4, go to
step l.
 If you chose 4"x6" or 5"x7", go to
step m.
If you chose Ledger or A3, the

Touchscreen will prompt you to put
the paper in manual feed slot. Read
the information on the Touchscreen,
and then confirm it by pressing OK.
(See Basic User's Guide: Loading
paper in the manual feed slot.)
Go to step m.
l
Press Print Size.
Swipe up or down, or press a or b to
display the options in the following table,
and then press the option you want to
set.
Example: Printed position for Letter size paper
1 2
3"x4" 3.5"x5"
4 5
5"x7" 6"x8"
m
If you do not want to change additional
settings, press
Press Start to print.
3
4"x6"
6
Max. Size
or OK.
65
8