Disconnecting The Usb Cable (Windows ® ) - JVC GR-D390UC Installation And Connection Manual

Disconnecting the USB Cable
®
(Windows
Before loading or unloading memory cards
or turning off the PC, first disconnect the
USB cable and turn off the camcorder.
1
Confirm that "
currently displayed on the LCD
monitor of the camcorder.
If "
wait until it disappears before
proceeding.
2
Double-
click the
[Safely
Remove Hardware] or [Unplug
or Eject Hardware] icon in the
status bar.
The [Safely Remove Hardware] or
[Unplug or Eject Hardware] dialog box
appears.
®
Windows XP: If not, wait a while then
go to step 5.
3
Select [USB Mass Storage
Device] or [USB Disk], and then
click [Stop].
®
Windows
)
" is not
" is currently displayed,
2000/XP
Windows
The [Stop a Hardware device] dialog
box appears.
4
Click [OK].
Windows
indicating that the device can be safely
removed appears, click [OK] and then
click [Close].
Windows
Windows
*The model name depends on the
connected camcorder.
5
Disconnect the USB cable.
6
Set the camcorder's Power
Switch to "OFF".
The camcorder turns off.
— 12 —
®
Me
®
2000/Me: If a message
®
2000/XP
®
Me