Cleaning The Debris Filter - Kenmore 402.4903 Series Use & Care Manual

MAINTENANCE (CONT.)
Cleaning the debris filter
We recommend cleaning the debris filter when water does not drain well or the "nd" error message is displayed.
1, Open the filter cover by pressing and pulling the handle of the 6,Wash any dirt or other material from the debris filter. Make sure
filter cover with your finger, the drain pump propeller behind the debris filter is not blocked.
2, Holding the drain cap, pull the drain tube that is hooked on the
guide hook to the front. Do not pull the drain tube with excessive
force.
3, Place a bowl under the washing machine to catch any remaining
water. Then, hold the drain tube with one hand, and turn the
emergency drain cap counter clockwise with the other hand to
separate it from the drain tube.
4, Drain the remaining water completely, f_
Drain cap
Debris filter cap _Y'_"
Debris filte
J
7,When you have finished cleaning the filter, insert the debris cap
and filter assembly back into the washer. Turn the debris filter
cap clockwise until the indicator on the debris filter cap is in the
12 o'clock position, pointing to the indicator on the washer.
:i!i!!iif_"(_ _ i _iiiii!!i;i,i;iiiii_/
8.Re-attach the emergency drain cap to the drain tube, and then
hook the tube to the hook guide.
9. Re-install the filter cover.
5. Pull out the debris cap and debris filter assembly.
filter cap
Debris i
24
Kenmole-Washer-Ownels-Manual EN.indd 24 3,23,2010 3:12:27PM