Before You Begin - Dell PowerEdge EL Manual

Updating BIOS on Dell 12G PowerEdge Servers
1
Client/Application
WSMAN over SSL
2
Target System
Figure 17 shows the pictorial view of the environment. It starts with the administrator (1) running
scripts to send WSMAN commands through an SSL connection. The target system (2) is equipped with
iDRAC, which is the management controller with advanced capabilities. The update repository (3)
contains the Dell update packages (DUPs) that will be used to update the firmware on the target
system.

Before you Begin

Here is a list of items that you need to prepare:
1. Verify that the target system is a Dell PowerEdge server with iDRAC enabled, configured, and
network-reachable to talk WSMAN.
2. If you are using Windows, verify that the winrm command line tool is configured and ready.
If you need help with this, read
Management.
3. If you are using Linux, verify that the openwsman command line tool is built, installed, and
ready. If you need help with this, go to the
access to technical help.
Figure 17. Remote Firmware Update
FTP / HTTP / TFTP / NFS / CIFS
Download
Installation and Configuration of Windows Remote
3
Update Repository
Openwsman Home and join the mailing list for
21