Using The Remote Control - JVC RV-NB1 Instructions Manual

Powered woofer cd system
Table of Contents

Advertisement

Adjusting the super woofer
volume
During play, you can adjust the bass level between BASS 1
(minimum) and BASS 6 (maximum).
Using the system
Turn the SUPER WOOFER VOLUME +/– control clockwise to
increase the bass level or turn it counterclockwise to decrease the
bass level.

Using the remote control

Press SUPER WOOFER VOLUME + to increase the bass level or
press SUPER WOOFER VOLUME – to decrease it.
Note: This function is not effective when the headphones are in
use.
Activating clear sound
The Active Clear Sound (ACS) circuit emphasize high-frequency
sound without lowering the signal-noise ratio, while adjusting its
output according to the input signal level. This results in a better
balance between the high-frequency sound and the low-frequency
heavy bass.
ACTIVE
CLEAR SOUND
ACS
ON
LEVEL
or
On remote control
On system
Press ACS (active clear sound) on the system or on the remote
control to turn it on or off. When it is turned on, the ACS ON
indicator lights in red.
The ACS LEVEL indicator blinks in green according to the input
signal level.
Selecting the sound mode
Sound modes can be selected to enhance the type of music being
played.
Press SOUND to select the sound mode.
Each time you press the button, the sound mode changes as
follows:
SOUND
SOUND
or
On system
On remote control
Sound mode selection:
BEAT: Set to this position for music with a heavy beat, such as
rock and disco music.
POP: Set to this position for light music including popular and
vocal music.
CLEAR: Set to this position for crisp and clear sounding music
with transparent highs.
FLAT (no effect): Set to this position when listening to classical
music.
Showing the time
While the power is turned on, you can see the current time (clock)
at any time, as follows.
Using the remote control
Press DISPLAY. Each time you press the button, the display
changes as follows:
Current sound source (e.g. FM103.5 MHz) = (clock) = (back to
the beginning)
Note: To let the clock work, you need to set the clock first. (See
“Setting the clock” on page 17.)
Page 8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rv-nb1cRv-nb1ebRv-nb1enRv-nb1eu

Table of Contents