Download Print this page

Craftsman INCREDI.PULL 316.794831 Operator's Manual page 4

4-cycle handheld blower
Hide thumbs Also See for INCREDI.PULL 316.794831:

Advertisement

Available languages

Available languages

CRAFTSMAN
2 YEAR
FULL
WARRANTY
FOR 2 YEAR(S) from the date of purchase, this product is warranted against any defects in material or workmanship.
Defective product will receive free repair
or free replacement
if repair is unavailable.
For warranty coverage details to obtain repair or replacement,
visit the web site: www.craftsman.com
This warranty
covers ONLY defects
in material and workmanship.
Warranty
coverage
does NOT include:
Expendable items that can wear out from normal use within the warranty period, such as air cleaner or spark plug.
Product damage resulting from user attempts at product modification
or repair or caused by product accessories.
Repairs necessary because of accident or failure to operate or maintain the product according to all supplied instructions.
Preventive maintenance,
or repairs necessary due to improper fuel mixture, contaminated
or stale fuel.
This warranty is void if this product is ever used while providing commercial
services or if rented to another person. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
Sears Brands Management Corporation,
Hoffman Estates, IL 60179
APPLICATIONS
Gip
*
Cleaning yards, garages, driveways, porches, patios, around walls,
fences and more
on/off
Switch
Throttle
Control
Spark
Plug Cover
Blower
Tube
Oil Plug
Starer
Rope Grip
Primer Bulb
Air Filter Cover
Nozzle
--
Curved
Tube
ASSEMBLING
UNiT
Installing Blower Tube
1. Align the bump on the end of the
blower tube with the bump slot on
the bottom end of the blower outlet
(Fig. 1).
2.
Insert the blower tube into the
blower outlet (Fig. 1).
3. Twist the blower tube clockwise
until
it locks into place (Fig. 1).
Blower
Outlet
Blower
Tube
Bump
Fig, 1
Removing
the Blower
Tube
1. Hold the unit firmly.
2.
Insert a flathead screwdriver
into the
Tube Lock. Twist the screwdriver
counterclockwise
1/4 turn and hold
(Fig. 3).
3.
Grasp the blower tube and twist it
counterclockwise
(Fig. 3).
4.
Pull the blower tube from the blower
outlet.
Fig. 3
Installing Nozzle/Curved
Tube
1.
2.
3.
Align the bump slot on the top end
of the nozzle/curved
tube with the
bump on the end of the blower tube
(Fig. 2).
Place the nozzle onto the blower
tube (Fig. 2).
Twist the nozzle clockwise until tight
(Fig. 2).
B, ....
////
N ozzle/
_,_
N_.
Curved
/'_
"_
Tu_
Bump
Fig. 2
Removing
the Nozzle/Curved
Tube
1. Hold the blower tube firmly.
2.
Grasp the nozzle and twist it counterclockwise
until the nozzle unlocks
from the blower tube.
3.
Remove the nozzle from the blower tube.

Advertisement

loading