Quick-Pin Adjustment; Dual Point Adjustment; Single Point Adjustment - Craftsman Lawn Mower Operator's Manual

"QU ICK+PIN" ADJUSTMENT
. To change cutting height, pull up on
adjuster lever, move wheel up or down
to suit your requirements and release
adjuster lever. Be sure all wheels are in
the same setting.
NOTE: Adjuster is properly positioned
when lever inserts into hote in plate,.
LEVERBACKWARD
TO LOWERMOWER
"DUAL POINT" ADJUSTMENT
Both front wheels are adjusted by a single
lever on the lett front wheel.. Likewise,
both rear wheels are adjusted by a single
lever on the lelt rear wheel+
, Pull adjuster lever toward wheel. To
raise mower, move fever forward to
desired position.. To lower mower, move
the lever toward the rear+.
Be sure to adjust both front and rear
wheels to the same height,
ght fever
LEVER BACKWARD
TO LOWER MOWER
LEVER FORWARD
TO RAfSE MOWER
LEVER
FORWARD
TO RAISE MOWER
"SINGLE POINT" ADJUSTMENT
o Pull adjuster lever toward wheel. To
raise mower, move lever forward to
desired position.. To lower mower, move
the lever toward the rear
Height
adjl
LEVER
BACKWARD
TO LOWER
MOWER
LEVER
FORWARD
TO RAfSE
MOWER
\
'1o