Clutch Lever - Yamaha YZFR1Y(C Owner's Manual

Start switch " "
Push this switch to crank the engine
with the starter. See page 6-1 for start-
ing instructions prior to starting the en-
gine.
The engine trouble warning light will
come on when the key is turned to "ON"
and the start switch is pushed, but this
does not indicate a malfunction.
Drive mode switch "MODE"
WARNING
Do not change the D-mode while the
vehicle is moving.
Using this switch changes the drive
mode to "STD", "A", or "B" in the follow-
ing order:
STD → A → B → STD
The throttle grip must be completely
closed in order to change the drive
mode. (See page 4-1 for an explana-
tion of each drive mode.)
INSTRUMENT AND CONTROL FUNCTIONS
EAU12711
TIP
G
The mode is set to "STD" by de-
fault. The "STD" mode resets
when the key is turned to "OFF".
G The selected mode is shown on
the drive mode display. (See page
EAU41700 4-11.)
EAU47494
EWA15340

Clutch lever

1. Clutch lever
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the handle-
bar grip. To engage the clutch, release
the lever. The lever should be pulled
rapidly and released slowly for smooth
clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion circuit cut-off system. (See page
4-30.)
4-16
EAU12820
4