Yamaha BLASTER YFS200N Owner's Manual page 117

NOTE:
Optional main jet can be obtained at a Yamaha
dealer.
Assembly
1. Reassemble the needle valve, float and
float chamber.
2. Reassemble the throttle valve.
3. Install the carburetor cap and tighten it
securely to the specified torque.
Carburetor cap tightening torque:
4 Nm (0.4 m•kg, 2.9 ft•lb)
4. Install the carburetor and tighten the joint
screws.
5. Install the securing plate. Match one of the
projections on the carburetor cap with one
of the indents on the securing plate.
cC
If the securing plate does not match a pro-
jection, tighten the carburetor cap until they
align. Do not loosen.
6. Tighten the securing plate screw to the
specified torque.
Tightening torque:
3.5 Nm (0.35 m•kg, 2.5 ft•lb)
7. Connect the fuel hose and oil delivery
hose.
8-17