Tool Use And Care Safety - Craftsman 320.10861 Owner's Manual

PERSONAL SAFETY cont.
3. ALWAYS avoid accidental starting. BE SURE switch is in the "Off" position before
plugging in. DO NOT carry tools with your finger on the switch, Carrying tools with
your finger on the switch or plugging in tools that have the switch in the "On" position
invites accidents.
4, ALWAYS remove adjusting keys or wrenches before turning the tool "On". A wrench
or a key that is left attached to a rotating part of the tool may result in personal injury,
5. DO NOT overreach, ALWAYS keep proper footing and balance at all times.
Proper footing and balance enables better control of the tool in unexpected situations.
6. ALWAYS use safety equipment, Always wear eye protection,
TOOL USE AND CARE SAFETY
1. ALWAYS use clamps or other practical ways to secure and support the workpiece
to a stable platform, Holding the work by hand or against your body is unstable and may
lead to loss of control.
2. DO NOT force tool. Use the correct tool and blade for your application. The correct
tool and blade will do the job better and safer at the rate for which it is designed,
3. DO NOT use tool if switch does not turn it "On" or "Off". Any tool that cannot be
controlled with the switch is dangerous and must be repaired°
4, ALWAYS disconnect the plug from the power source before making any
adjustments, changing accessories,or storing the tool, Such preventive safety
measures reduce the risk of starting the tool accidentally°
5. ALWAYS store idle tools out of reach of children and other untrained persons,
Tools are dangerous in the hands of untrained users.
6. ALWAYS maintain tools with care. Keep cutting tools sharp and clean, Properly
maintained tools with sharp cutting edges are tess likely to bind and are easier to control.
7. ALWAYS check for misalignment or binding of moving parts, breakage of parts,
and any other condition that may affect the tool's operation. If damaged, have the
tool serviced before using. Many accidents are caused by poorly maintained toots=
6