Accessories; Extension Cords; Blades - Craftsman 320.10861 Owner's Manual

The following recommended accessories are currently available at your local Sears Store,
WARNING: The use of attachments or accessories that are not recommended might I
be dangerous and could result in serious injury.
!
EXTENSION CORDS
Sears offers a large selection of extension cords that help extend your working range.
The use of any extension cord will cause some loss of power_ To keep the loss at a minimum and
to prevent overheating, use an extension cord that is heavy enough to carry the current that
the tool will draw
A wire gauge (AWG) of at least 14 is recommended for an extension cord 25 feet or less in length,
When working outdoors ALWAYS use an extension cord that is suitable for outdoor use.
The cord's jacket will be marked WA.
,,,,it,,= 1 ,,,1 ...... = ,11,,1,11 ,,
I CAUTION:
Keep extension cords away from the cutting area, and position the cord I
so it will not get caught on lumber, tools, etc during the cutting operation
I ................................. " ,H ..... i
I
= = == ,,====,,,,,= ,, === m ==, = == , HHHI,IH'"""N'IH"'= .... H H
WARNING:
Check extension cords before each use. If damaged, replace it
immediately. NEVER use a tool with a damaged cord because touching the damaged area
could cause electrical shock, resulting in serious injury,
.... = =
BLADES
Sears has a large selection of circular saw blades for fast, efficient cuttiing in a variety of materials
and applications,
,,, ,,,i,,,,,,,,
7 1/4-in. (18 era) 40-Tooth General-Purpose Cut-Off Blade
7 1/4-in° (18 cm)
35-Tooth Master Combination Blade
7 1/4-in, (18 cm) 200-Tooth Plywood Blade
7 1/4-in. (I8 cm) 18-Tooth Carbide Blade
7 1/4-in, (18 cm) 18-Tboth Mach II Silver Series Carbide Blade
7 114-in. (18 cm) 24-Tooth Mach II Silver Series Carbide Blade
7 1/4-in.
(I8 cm)
24-Tooth Combination Carbide Blade
Sears also offers Combination Squares, Framing Squares and various length Edge Guides
to help you with all your cutting needs
25