Blowing Feature - Craftsman 113.177690 Owner's Manual

Operation (continued)
Blowing Feature
Your Vac features a blowing port. It can
blow sawdust and other debris. Follow
the steps below to use your Vac as a
blower.
_k WARNING: Always wear safety
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
using as a blower.
,_, WARNING: To avoid injury to
bystanders, keep them clear of blowing
debris.
CAUTION: Wear a dust mask if
blowing creates dust which might be
inhaled.
Craftsman recommended accessories are
available at Sears retail stores and
sears.com. The Sears 1-7/8" car nozzle,
Stock No. 17839 is recommended for
blowing debris.
Push/Pull Handle
Handle
_1_ CAUTION: To reduce the risk of
hearing damage, wear ear protectors
when using the Vac/blower for extend-
ed hours or when using it in a noisy
area.
1. Locate blowing port of your Vac.
2. Insert the locking end of the "Pos-I-
Lock ®''hose into the blowing port of the
Vac. The hose should snap into place.
To remove the hose from the Vac,
press the release button in the hose
assembly and pull the hose out of the
Vac inlet.
3. (Optional) Attach extension wand to
opposite end of hose
4. Turn Vac on and you are ready to use
your Vac as a blower.
Swivel End
Of Hose
Extension
Wand (Optional)
10