Extension Cords - Craftsman 320.28060 Owner's Manual

Thefollowing recommended accessories arecurrently a vailable at yourlocal S earsStore,
................... ii ,,Ju,,,,,
WARNING:
The use of attachments or accessories that are not recommended might
be dangerous and could result in serious injury
EXTENSION CORDS
Sears offers a targe selection of extension cords that help extend your working range
The use of any extension cord will cause some toss of power, To keep the loss at a minimum and
to prevent overheating, use an extension cord that is heavy enough to carry the current that
the tool will draw,
A wire gauge (AWG) of at least 14 is recommended for an extension cord 25 feet or less in length,
When working outdoors ALWAYS use an extension cord that is suitable for outdoor use
The cord's jacket will be marked WA,
,, , , ,,, ,,,,u,,,,u ,,,,,,,,,,,,,,,,,,,,,, , = = , , , ,,,, ,,,,, , I,I
i Z_ CAUTION:
Keep extension cords away from the cutting area, and position the cord
I so it wit] not get caught on lumber, tools, etc_ during the cutting operation,
I ,/_ WARNING:
Check extension cords before each use If damaged, replace it
immediately NEVER use a tool with a damaged cord because touching the damaged area
could cause electrical shock, resulting in serious injury .......................
BLADES
Sears has a large selection of circular saw blades for fast, efficient cuttiing in a variety of materials
and applications,
,,, ,,,,t =
7 1/4-trio 40-Tooth General-Purpose Cut-Off Blade
7 1/4-in, 35-Tooth Master CombinationBlade
7 1/44n, 200-Tooth Plywood Blade
7 1/4-in, 18-Tooth CarbideBlade
7 1/4-ino18-Tooth Mach II Silver Series CarbideBlade
7 1/4-in, 24-Tooth Mach I1SilverSeries Carbide Blade
71/4-in. 24-Tooth Combination Carbide Blade
Sears also offers Combination Squares, Framing Squares and various length Edge Guides
to help you with all your cutting needs
26