Craftsman 320.28060 Owner's Manual page 15

Circular saw 7 1/4-in. with laser trac
Hide thumbs


DO NOT let familiarity with your saw make you careless, Remember that
! aca_fe_s f_aot_on
ofasecond issu.icient tocause severe hjury
Before attempting to use any toot, be sure to familiarize yourself with all the operating features
and safety instructions
Using the Laser Light Feature (see Figs. 3 & 4)
DO NOT stare directly at the laser beam NEVER aim the light at any
I person or object other than the workpiece,,
to The tinted glasses that were included wilt enhance the laser
Laser Button
light in bright light conditions
DO NOT wear these glasses
if they interfere with the safe operation of this saw.
2, DO NOT turn the laser beam on until the saw is on
the workpiece.
3, Mark the line of cut on the workpiece
4. Adjust the cutting angle and cutting depth as needed,
5. Plug in the saw and push button to turn on laser (See Fig 3)
6. Align laser beam with line-of-cut (See Fig. 4)
7. Squeeze the trigger switch and slowly push the saw forward
using both hands. Keep the red laser light beam on the
Fig 4
8,, ALWAYS shut off the laser light when you have
finished cutting



  Related Manuals for Craftsman 320.28060