Craftsman 358.798940 Operator's Manual page 4

working order, or the engine must be
constructed, equipped, and maintained
for the prevention of fire° Check with
your state or local authorities for regu-
lations pertaining to these require-
ments. Failure to follow these require-
ments is a violation of the law. This unit
is not factory equipped with a spark ar-
restor; however, a spark arrestor is
available as an optional part. If a spark
arrestor is required in your area, con-
tact Sears Service for the correct kit.
The spark arrestor, blower tubes, and
nozzles must be assembled to unit to
be in full compliance with regulations.
SPECIAL NOTICE: Exposure to vibra-
tions through prolonged use of gaso-
line powered hand tools could cause
blood vessel or nerve damage in the
fingers, hands, and joints of people
prone to circulation disorders or abnor-
mal swelling. Prolonged use in cold
weather has been linked to blood ves-
sel damage in otherwise healthy
people, if symptoms occur such as
numbness, pain, loss of strength,
change in skin color or texture, or loss
of feeling in the fingers, hands, or
joints, discontinue the use of this tool
and seek medical attention. An
antivibration system does not guaran-
tee the avoidance of these problems.
Users who operate power tools on a
continual and regular basis must moni-
tor closely their physical condition and
the condition of this tool.
CARTON CONTENTS
Check carton contents against the fol-
lowing listo
Model 358.798940
• Blower
o Blower tube
• Nozzle
° Container of oil
NOTE: It is normal for the fuel filter to
rattle in the empty fuel tank,
ASSEMBLY
WARNING: If received assembled,
repeat all steps to ensure your' unit is
properly assembled and all fasteners
are secure.
• No tools are required for assembly.
BLOWER TUBE
,, Assemble the blower tube and nozzle
to the unit (turn clockwise to tighten).
Grooves
4