Table of Contents
Advertisement
•
Avoid awkward
operations
and hand positions
where a sudden
slip could
cause your hand to move into the blade.
•
Never reach into the cutting path of the blade.
WARNING:
Use of this product can generate
dust containing
chemicals
known to the state of California to cause cancer, birth defects or other
reproductive
harm. Some examples
of these chemicals
are:
•
Lead from lead-based
paints.
•
Crystalline
silica from bricks and cement and other masonry
products.
•
Arsenic and chromium,
from chemically
treated lumber.
Your risk from these exposures
varies, depending
upon how often you do this
type of work. To reduce your exposure
to these chemicals:
•
Work in a well-ventilated
area.
•
Work with approved
safety equipment,
such as those dust masks that are
specially
designed
to filter out microscopic
particles.
Avoid prolonged
contact
with dust from power sanding, sawing,
grinding, drilling
and other construction
activities.
Wear protective
clothing
and wash exposed
areas with soap and water. Allowing
dust to get into your mouth, eyes or lay on
the skin may promote
absorption
of harmful chemicals.
,_
WARNING"
Use of this tool can generate and/or disburse
dust, which may
cause serious and permanent
respiratory
or other injury. Always
use NIOSH/
OSHA approved
respiratory
protection
appropriate
for the dust exposure.
Direct
particles
away from face and body.
ADDITIONAL
RULES FOR SAFE OPERATION
•
Know your
power tool.
Read this product
manual carefully. Learn the
applications
and limitations,
as well as the specific
potential hazards
related
to this tool. Following this rule will reduce the risk of electric shock, fire or
serious injury.
•
Always
wear safety
glasses
or eye shields
when using this tool. Everyday
eyeglasses
may have impact-resistant
lenses; they are not safety glasses.
•
Protect
your lungs. Wear a facemask
or dust mask if the operation
is dusty.
•
Protect
your hearing.
Wear appropriate
personal hearing protection
during
use. Under some conditions,
noise from this product
may contribute
to
hearing loss.
•
All visitors
and bystanders
must wear the same safety equipment
that the
operator
of the tool should wear.
•
Inspect
the tool cords
periodically
and, if damaged,
have them repaired at
your nearest Sears Service Center. Be aware of the cord location.
28195
Manual_Revised_07-0623
Page 11
Advertisement
Table of Contents
