Carrying Handle; Spindle Lock Button; Miter Lock Handle; Trigger Lock - Craftsman 315.243150 Owner's Manual

CARRYING
HANDLE
See Figure 4.
For convenience when carrying or transporting your
miter saw from one place to another, a carrying
handle has been provided on top of the saw arm as
shown in figure 4. To transport, turn eff and unplug
your saw, then lower the saw arm and lock it in the
down position. Lock saw arm by depressing the lock
pin.
CARRYING
HANDLE
SPINDLE LOCK BU'I-rON
See Figure 5.
A spindle leck button has been provided for locking
the spindle which keeps the blade in your saw from
rotating. Depress and hold the lock button while
installing, changing, or removing blade only.
SWITCH
TRIGGER
SPINDLE
LOCKBUTTON
SAW LOCK
ARM PIN
MITERLOCK
HANDLE
SAWARM
LOCKEDIN DOWNPOSITION
Fig. 4
MITER LOCK HANDLE
See Figure 4.
The miter lock handle securely locks your saw at
desired miter angles.
Fig. 5
TRIGGER LOCK
See Figure 6.
To prevent unauthorized use ef your compound miter
saw, we suggest that you disconnect it from the power
supply and lock the switch in the off position. To lock
the switch, install a padlock (not included) through the
hole in the switch trigger. A lock with a long shackle
up to 17164 in. diameter may be used. When the lock
is installed and locked, the switch is inoperable. Store
the padlock key in another location.
SWITCH
TRIGGER
PADLOCK
11
Fig. 6