Advertisement
Quick Links
Operator's
Manual
I CRRFTSMRN°I
4.0 Amp Motor
13 Inch Cutting Path/.065
In. Line
ELECTRIC
WEEDWACKER
®
Model No.
358.799462
@
WARNING:
Read and follow all Safety
Rules and Operating
Instructions
before first use of this product.
For answers
to your questions
about this product:
Call 7 am-7
pm, Mon-Sat;
10 am-7
pm, Sun
1-800-235-5878
(Hours
listed are C entral
Time)
Sears,
Roebuck
and Co., Hoffman
Estates,
IL 60179
U.S.A.
530088746
10/9/00
Advertisement
Related Manuals for Craftsman WEEDWACKER 358.799462
Summary of Contents for Craftsman WEEDWACKER 358.799462
- Page 1 Operator's Manual I CRRFTSMRN°I 4.0 Amp Motor 13 Inch Cutting Path/.065 In. Line ELECTRIC WEEDWACKER ® Model No. 358.799462 WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product. For answers to your questions about this product: Call 7 am-7 pm, Mon-Sat;...
- Page 2 Sears will repair or replace it, free of charge. This warranty does not cover the nylon line. WARRANTY SERVICE IS AVAILABLE BY RETURNING THE CRAFTSMAN ELECTRIC WEEDWACKER :R LINE TRIMMER TO THE NEAREST SEARS STORE OR SERVICE CEN- TER IN THE UNITED STATES.
- Page 3 dusty. Always wear h eavy, long • To reduce risk of electrical shock, pants, long sleeves, boots, and use extension cords specifically gloves. Donot g obarefoot orwear marked as suitable for outdoor ap- sandals. pliances having electrical rating not • Secure hair a bove s houlder length. less than the rating of unit.
- Page 4 SERVICE AND A DJUSTMENTS). Nev- TRANSPORTING AND STORAGE eruse wire, rope, string e tc. • Stop the unit and disconnect • Use specified trimmer spool. M ake power source when not in use. sure spool isproperly installed and • Carry the unit with motor stopped. allparts a re securely fastened.
- Page 5 CARTON CONTENTS ATTACHING THE SHIELD Check carton contents against the fol- '_WARNING: The shield must be lowing list. Model 358.799462 properly installed. The shield provides • Trimmer partial protection from the risk of • Shield thrown objects to the operator •...
- Page 6 KNOW YOUR T RIMMER READ THIS O PERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare theillustrations with your u nit t ofamiliarize yourself with the loca- tion of the various controls and adjustments. Save this manual for future refer- ence.
- Page 7 CORRECT OPERATING POSITION EDGING POSITION You can press this button and twist the lower portion 180 ° into an edging position. Button EDGING While edging allow the tip of the line to make contact. Do not force the line. Trimming Edging The edge guard helps protect the unit and keeps the unit from contacting...
- Page 8 clean up. Keep the line parallel to and Mowing above the surfaces being swept and move the tool from side to side. Sweeping SWEEPING The fanning action of the rotating line can be used for a quick and easy CUSTOMER RESPONSIBILITIES WARNING: Disconnect...
- Page 9 (#71-85837), orcutalength of30 the hub to release it from the feet o f.065" (1.6 mm) diameter notch; otherwise, the unit will not Craftsman® Pro Trimmer line. U se function properly. ofheavier lines c ould o verload the Small unit a nd damage unit. Never use wire, rope, string, etc., which c an...
- Page 10 TROUBLESHOOTING TABLE ,_WARNING: Always stop unit and disconnect from the power source before performing all of the recommended remedies below except remedies that re- quire unit to be operating. TROUBLE CAUSE REMEDY Semi-automatic 1. Crowding trimmer line 1. Allow tip of line to do the cutting. head stops against material being...