Download Print this page

Craftsman 320.10871 Operator's Manual page 30

13 amp 7 14-in circular saw with laser trac
Hide thumbs

Advertisement

LUBRICATION
All of the bearings in this tool are lubricated with a sufficient amount of high-grade
lubricant for the life of the tool under normal operating conditions.
Therefore,
no further lubrication is required.
If the blade does not follow a straight
line:
• Teeth are dull, This is caused by hitting a hard object such as a nail, dulling
teeth on one side, The blade tends to cut to the side with the sharpest teeth.
o Base is out of line or bent.
° Blade is bent
• Edge guide or straight edge is not being use&
If the blade binds or smokes from friction:
- Blade is dull.
• Blade is on backwards.
. Blade is bent.
. Workpiece is not properly supported.
- Incorrect blade is being used.
z_ WARNING:
The use of attachments
or accessories
that are not
recommended
for this tool might be dangerous
and could result in serious injury,
Sears and other Craftsman outlets have a large selection of 7 1/4-inch Craftsman
steel carbide-tipped
blades designed for specific cutting applications,,
Contractor bulk packs are also available,,
Sears and other Craftsman outlets
also offer sawhorses, combination
and
framing squares, straight edges, edge guides, and a large assortment of
clamps to help you with all your sawing needs.
Visit your local Sears store or other Craftsman outlets or shop sears corn/craftsman
30

Hide quick links:

Advertisement

loading

  Related Manuals for Craftsman 320.10871