Maintenance - Craftsman 320.10871 Operator's Manual

13 amp 7 14-in circular saw with laser trac
Hide thumbs

Advertisement

/_
WARNING:
Attempting
to make cuts without the bevel adjustment
locking
lever securely tightened
can result in serious injury.
z_ WARNING:
To ensure safety and reliability, all repairs - with the exception
of the externally
accessible
brushes - should be performed by a qualified
service
technician
at a Sears Service Center.
z_ WARNING:
For your safety, ALWAYS turn off switch and unplug circular
saw from the power source before performing
any maintenance
or cleaning.
It has been found that electric tools are subject to accelerated
wear and possible
premature failure when they are used to work on fiber glass boats and sports cars,
wallboard, spackling compounds
or plaster.. The chips and grindings from these
materials are highly abrasive to electrical tool parts, such as bearings, brushes,
commutators,
etc. Consequently,
it is not recommended
that this tool be used for
extended work on any fiberglass material, wallboard, spackling compound or
plaster. During any use on these materials, it is extremely important that the
tool is cleaned frequently by blowing with an air jet.
/
/_
WARNING:
Always wear safety goggles or safety glasses with side shields
|
during power tool operations,
or when blowing dust. If operation
Is dusty, also wear
J
a dust mask.
ROUTINE
MAINTENANCE
/_
WARNING:
DO NOT at any time let brake fluids, gasoline, petroleum-based
products, penetrating
oils, etc. come in contact with plastic parts, Chemicals can
damage, weaken or destroy plastic, which may result in serious personal injury.
Periodic maintenance
allows for long life and trouble-free operation. A cleaning,
lubrication and maintenance
schedule should be maintained.
As a common
preventive maintenance
practice, follow these recommended
steps:
1 When work has been completed,
clean the tool to allow smooth functioning
of the tool over time.
2 Use clean damp cloths to wipe the tool.
3 Check the state of all electrical cables.
4 Keep the motor air openings free from oil, grease and sawdust or woodchips,
and store tool in a dry place_
5 Be certain that all moving parts that are exposed are well lubricated, particularly after
lengthy exposure to damp and/or dirty conditions.
29

Hide quick links:

Advertisement

loading

  Related Manuals for Craftsman 320.10871