Download Print this page

Craftsman 315.101260 Operator's Manual page 12

19.2 volt radio
Hide thumbs

Advertisement

DiGiTAL
DISPLAY
See Figure 5.
The digital display on the front of the radio illuminates
when the radio is switched ON, displaying the radio mode
and frequency/channel
setting. If the battery charge is low,
a flashing low battery indicator will also be displayed.
NOTE: Charge battery when low battery indicator begins
to flash. If the radio continues to operate with the low
battery indicator flashing, the radio will drain the battery
until the radio will no longer emit sound and the backlight
and the LCD display will also flash. To avoid deep
discharge, remove the battery pack from the radio and
charge immediately.
O Q OM.,
BATTERY iNDiCATOR
FM MODE
FM ! U 2.0M.
L I 1.2!
WEATHER BANDMODE
I
AM MODE
,vx
I
AUX MODE
Fig. 5
CHANGING
CHANNELS
See Figures 4 - 6.
To change radio channels manually in AM or FM setting,
use the tune button to seek manually or with the seek
feature.
AM/FM Channels:
[] With the radio set to AM or FM, push the tune/seek
selector up or down and quickly release to manually
change radio channels one frequency at a time.
[] To change radio channels using the seek feature, push
the tune/seek selector up or down and hold for one
second before releasing to directly skip to receivable
radio channels.
To change channels
in Weather
Band Mode:
[] With the radio set to Weather Band, push the tune/seek
selector up or down and quickly release to manually
change weather band channels one frequency at a
time.
ANTENNA
Fig. 6
12

Advertisement

loading

  Also See for Craftsman 315.101260