Download Print this page

Safety Precautions; Safety Instructions - Craftsman 320.28191 Product Manual

5-1/2-in. circular saw
Hide thumbs

Advertisement

_k
WARNING:
BE SURE to read and understand
all instructions
in this product
manual.
Failure to follow
all instructions
may result in electric
shock, fire and/or
seri-
ous personal
injury.
Z_
WARNING:
All repairs
should
be performed
by a qualified
service
technician
at a Sears
Service
Center
to ensure
safety and reliability.
Before
using the circular
saw, read the accompanying
Safety
Instructions
carefully
and thoroughly,
and keep all of the documents
supplied
with the tool in a safe place°
SAFETY
PRECAUTIONS
FOR LASERS
WARNING:
Always follow the instructions
contained
in this manual when
using the laser. Use of this feature in any manner other than that which appears in
this manual may result in a hazardous radiation exposure,.
This circular
saw has a built-in
laser light. The laser is a Class
ilta and emits out-
put power
of a maximum
2.5mW
and 635_665nm
wavelengths.
These lasers do
not normally
present
an optical
hazard.
However,
DO NOT stare at the beam as
this can cause flash blindness°
The label opposite
is on your tool. It indicates
the location
from which
the saw emits the
laser light, BE AWARE
of the laser light loca-
tion when
using,
ALWAYS
MAKE SURE that
any bystanders
in the vicinity
of use are made
aware
of the dangers
of looking
directly
into
the laser°
_k
WARNING:
LASER
LIGHT. LASER
RADIATION.
Avoid
Direct
Eye Exposure.
DO NOT stare into beam_ Only turn laser beam
on when the saw is on the work-
piece.
Class
ltla laser.
WARNING:
Use of controls, adjustments
or performance
of procedures
oth-
er than those specified in this manual may result in hazardous radiation exposure.
WARNING:
The use of optical instruments such as, but not limited to, tele-
scopes or transits to view the laser beam will increase eye hazard.
1.
13o not remove
or deface
any product
labels,
Removing
product
labels
increases
the risk of exposure
to laser radiation.
2.
Avoid
direct
eye exposure,
The laser beam
can be harmful
to eyes Do not
look directly
into the laser-beam-output
aperture
during
operation.
Do not
project
the laser beam
directly
into the eyes of bystanders.
Turn the laser on
only when
making
cuts.
3.
The laser
on the saw is not a toy, Always
keep it out of the reach of chil-
dren. The laser light emitted
from this device
should
never
be directed
towards
any person
for any reason.
28191 Manual Revised_07-0202
Page 5

Advertisement

loading

  Related Manuals for Craftsman 320.28191